install Hainan EPS line What details cannot be ignored

According to the device construction drawings, snap the positioning line points at the parts of EPS line components to be installed, and dial the center line or side line. Cut the EPS line according to the device dimension in the drawing. EPS components are of standard dimensions, and the width of splicing joint shall be considered when cutting. When posting EPS components, the grid cloth shall be turned over. In case of special circumstances, it can be directly posted without turning over.

Polyphenyl Hainan EPS component High quality bonding mortar shall be used as the bonding agent, and the thin layer full bonding method shall be used for pasting. The EPS component shall be kneaded forcefully to make the mortar overflow from the periphery. The bonding joint width shall not be greater than 3mm. The bonding joint shall follow the bonding, and the mortar joint shall be full, and the appearance of the EPS component shall be neat.

For larger EPS components, support is required for temporary fixation during installation. If splicing is required for the device, the assembly dimension and viewpoint shall be measured in advance, and the pre assembly shall be carried out in a flat place. The gap shall not be greater than 3mm. High quality bonding mortar shall be used as the splicing and bonding data. The mortar consistency can be slightly higher, and the thin layer full bonding method shall be used. Slightly and evenly knead and hammer the joints to meet the requirements.

        Hainan Sculpture Tips for small knitting: after splicing, the mortar joint shall be leveled with a mortar knife, so that EPS components can be integrated. After drying, if there is residual bonding mortar left at the seam of EPS component, sand paper can be used for polishing. After drying, the splicing part of EPS components shall be treated with special anti cracking adhesive for EPS components. See the instructions for use of special anti crack adhesive for treatment. Self developed, self produced and self sold, Huigu Packaging is a manufacturer of EPS line components.

Hainan Jin'ao Garden Sculpture Art Co., Ltd. is a comprehensive enterprise specialized in design, creation, production and installation; The company's works involve urban sculpture, landscape sculpture, campus sculpture, large-scale relief mural, fountain project, urban lighting, etc., and undertake sculpture processing and installation projects of FRP sandstone, stone sculpture and other materials.

Hainan Jin'ao Garden Sculpture Art Co., Ltd. has a strong technical force and a capable construction team, which not only guarantees the quality of sculpture construction, but also effectively guarantees the artistic quality of sculpture engineering.