Do you know the use order of EPS components? What is the impact of its use sequence on the construction? next Hainan Sculpture The editor gives you a detailed answer:

First of all, pay attention to the selection order of EPS components. The foundation wall is particularly stable, free of hollow drums, itching, oil and impurities. Paste the drill bit elastic line onto the foundation wall according to the EPS composition line. Open the glass fiber mesh behind the EPS component line, and 20m at the top and back for adhesion. The back of EPS component production line shall be coated with polymer mortar and painted with 6m low polymer mortar. Brush the lower polymer mortar together with a special trowel and scrape it into a strip as low as 5m.

Secondly, after pasting the EPS line, restore the 20m grid cloth on the top and back of the EPS line and the longitudinal starting point. Scrape with a special spatula, evenly apply a layer of 2m low polymer mortar, paste a layer of technical grid, and then evenly apply a layer of 1m low polymer mortar. EPS components can be selected safely on reinforced concrete or brick concrete plaster wall.

　　 Hainan EPS component The manufacturer's warm tip: if EPS external wall insulation hollow bricks, aerated concrete blocks or lightweight materials are added to the wall, the builder must determine the selection techniques according to its actual situation, such as using light steel keel framework, wood keel framework, etc. Fix on the load-bearing buildings (columns, beams, plates), and fix the components on them after anti-corrosion treatment.

Before construction, check whether the wall can meet the development requirements. If there is a texture allergy, the zipper must be able to withstand the level and can often be constructed. In order to ensure the quality of the decoration works, it is not allowed to carry out wet operations on the construction surface or operations that may pollute the decoration works. The members shall be selected from bottom to top, and the members shall be selected with open joints. Joints shall be made with 1:2 cement mortar.

The above is about Hainan EPS Explanations on the use order of components, and more information about Hainan Jin'ao City Sculpture Garden Company, please continue to follow our official website!