Will EPS components break? Hainan Sculpture A small editor will introduce you.

If you want to ensure the good thermal insulation performance of the external wall of the building, you must select EPS components that are reliable in quality and meet the relevant performance requirements. Because the weather and climate conditions are different in different places, a safe and reliable insulation system should be selected during the design. When designing, all parts of the exterior wall surface of the building should be taken into account. The construction factors of EPS components also have many aspects to consider:

1. For the construction environment factors of EPS components, pay attention to the weather conditions during construction from time to time, and avoid construction in extreme weather such as high temperature, strong wind, heavy rain and low temperature.

2. The construction process of EPS components must be carried out in strict accordance with the relevant standard schedule, and no jerry building is allowed

In order to save money, many construction companies often choose cheap EPS component materials. Sometimes, construction bidding companies choose some products with bottom price that do not meet the standard for economic benefits. This will only create some "garbage buildings". Later, they are not sure about the thermal insulation of external walls, resulting in substandard phenomenon.

In addition, EPS Component Engineering Company said that everything is possible under what conditions! As EPS materials, cracks in EPS components will seriously affect the appearance of buildings. In addition to natural factors such as temperature and humidity, cracks in EPS components can also be caused by improper construction of EPS component works. Therefore, the construction of EPS component works must be strictly in accordance with the requirements. It can't be said that it will not occur, but what if EPS component breaks during construction of EPS component project?

First of all, the horizontal EPS components at the corners of the building must be designed as internal and external corner components. Do not use EPS components to cut and splice. In addition, keep the single side length of the internal and external corners between 0.3-1.2m; Its longitudinal connection also has great attention:

1. Segmentation design of longitudinal connection EPS members shall avoid transferring the weight of upper members to lower members;

2. The length of each section of EPS component shall be determined according to the requirements of elevation effect, structural conditions and conditions of transportation, manufacturing and installation of components. The length of a single component shall be kept between 1.2m and 3.6m.

3. Ensure that the gap width and treatment at the connection of longitudinal continuous members are the same as that of horizontal continuous members.

Secondly, the length of each EPS component must be determined according to the axis size of the building, the position of the door and window openings, the change of the wall corner, the position of the wall expansion joint and other factors, so that the position of the connection joint is coordinated and symmetrical with the building elevation. In addition, attention should be paid to Hainan EPS component In general, the length of horizontal EPS components is between 1.2m and 2.4m.