Hainan EPS

As a decorative line, EPS decorative line has a wide range of uses. In order to meet various decorative needs, EPS decorative line will appear in various shapes and shapes. Now, we will introduce the production process and characteristics of EPS decorative line.
If you want to know the use of eps lines, you should first understand its manufacturing process. The manufacturing process of eps decorative lines is difficult, so there are fewer manufacturers producing such lines. Its main production processes include the following two types: one is to use mechanical processing, which is to make the cross section mold of the arc lines with resistance wires, and then design the parameters of the arc, In this way, the machine can be used for cutting. After cutting, use the centrifugal glue hanger to coat the mastic and process it into shape. This method has the advantage of even gluing; The line size is very standard; The output is high, and the daily output of one production line can reach 1500 linear meters.
No honeycombs and pits are allowed on the visible surface of the eps decorative line. The area of the honeycombs and pits on the non obvious parts shall not exceed 5cm2, and the depth shall not exceed 2mm. The number of honeycombs and pits on each product shall not exceed 2. Warping, the warping value shall not be greater than 2mm/m (it is allowed to use external force to straighten). For plane bending, the bending value shall not be greater than 2mm/m (it is allowed to use external force to straighten). The straightness (lateral bending) of the edge is less than 2mm/m (it is allowed to use external force to straighten).
The other is to cut the wedge mouth with the back side of the artificial straight line, and then fold it into an arc. This process saves materials, but has high technical requirements for workers, high scrap rate and low output.