EPS decorative line installation is beautiful and generous, and the actual effect is stronger! The secondary interior decoration is really a university issue that we attach great importance to, and there are many aspects to consider inside and outside EPS decorative line, as a new type of raw material for exterior wall decoration, is painted with various interior wall coatings on the exterior surface after installation. How to install EPS decorative line to make it more beautiful and elegant?
1. In view of the simple European style of high-rise residential buildings, the installation of EPS decorative lines is very difficult and the construction period is long, which will lead to cracks and poor durability EPS foam line has the advantages of convenient installation, economic benefits and durability. Paste alkali resistant and alkali resistant mesh cloth, combined with various special anti crack mortar outer protective layers, it will not be harmed by environmental temperature changes, low temperature and high temperature resistance, and will not be harmed by humid and cold climate and haze
2. The mortar used for the construction of EPS decorative line is divided into special bonding mortar and full m-layer high polymer anti crack mortar. The mass ratio of mixed bonding mortar is water: mortar=1:5. The manufacturer of EPS decorative line adds mixing along the river to ensure that the mixing is full and uniform. After mixing, the mortar must stand for 5 minutes, and can be used only after mixing again
EPS decorative line 3. For the wall surface that must pass the completion acceptance, the EPS decorative line must be cleaned to remove some dirt left by the above engineering buildings, make preliminary preparations for the decoration design of EPS decorative line, and prepare mortar, which is also an important raw material. It must be applied during the installation of EPS decorative line, and the actual mortar ratio needs to be mastered, So that the manufacturer of EPS insulation wire can understand the content
4. Wrap a layer of alkali resistant mesh cloth with the EPS decorative line cut by the laser, and then apply a layer of crack resistant mortar. It should be noted here that the thicker the crack resistant mortar is, the better it is. Only the crack problem needs to be considered when filling, so it should be based on the practical experience of specific projects
5. Compared with the traditional decoration design, EPS decorative lines have many advantages. European architecture is also due to the use of EPS European classic wire frames. EPS decorative wire factory for exterior walls is so beautiful, durable, and of good quality. It is the raw material for many people to decorate the exterior walls of engineering buildings, and plays a beautiful decorative design role around us

Hainan EPS