The GRC industry chain is mainly composed of raw material suppliers, GRC product use consulting and effect designers, GRC product design and production vendors, GRC product installation and construction manufacturers, and end users with personalized GRC product needs as the end users. GRC industrial value chain is the structural form of value organization and creation behind the industrial chain. It represents the value attribute of the industrial chain and reflects the transfer and creation of value.

Snap the positioning line (center line or side line) on the installation position of GRC components according to the construction drawing. When pasting components, the mesh should be turned over. Under special circumstances, it can be pasted directly without turning the package. The whole bonding method shall be adopted for pasting, and the EPS component shall be pressed forcefully to make the mortar overflow from the surrounding, and the bonding width shall not exceed 3mm. The bonding shall follow the hook bonding, the mortar joint shall be full, and the surface of EPS parts shall be kept clean.

Building decoration components can be basically divided into six categories: European decorative columns, various eaves lines, door and window covers, door and window line covers, decorative flowers and simulated stones. Through simulation design, the building is noble, elegant, simple, realistic, beautiful and natural.

The installation method of non bearing GRC Roman column is the same as pouring concrete from the upper opening after installation. The difference is that load-bearing GRC Roman columns should be installed first and then covered, otherwise concrete cannot be poured, while non load-bearing GRC Roman columns can be decorated with buildings first and then GRC Roman columns.

Hainan Sculpture _ Hainan GRC component _ Hainan EPS