Mix the mixture made of special mortar and special cement at a ratio of 1.5:1, and mix it evenly. It is called special adhesive mortar (or use high polymer cement paste).

Clean the installation base surface without any impurities, and set cement steel nails on the wall (with a spacing of about 700mm) to prevent the framework from slipping during installation.

Cut the structure according to the actual required length, and immediately piece together and check after cutting. Apply adhesive paste or high polymer mastic on the splicing part and the part exposed the foam surface. Quick splicing.

Apply paste on the back of eps components and install them immediately. Fix it with cement nails (2-4 hours), gently adjust the position of members, and ensure that all joints are straightened and neatly assembled.

Excess special cement glue shall be removed with scraper or putty knife, and stains shall be removed with wet cloth or wool. If the surface is damaged, it shall be coated with special cement sand, and then polished with 60 hardness sandpaper to ensure that the component surface is free of defects.

EPS external thermal insulation system is a new structural system composed of special mortar, board, glass fiber mesh cloth and finishing coating, which integrates wall insulation and decoration functions. Since the oil crisis in the 1970s, this system has been gradually promoted and developed to reduce the energy consumption of civil and industrial buildings and facilities. Especially with the continuous improvement of materials and application technology, EPS external insulation and decoration system has become one of the competitive systems in building energy-saving walls today.

Hainan Sculpture _ Hainan GRC component _ Hainan EPS