GRC production process flow: make mold according to the drawing → connect rebar bonding → one layer of mortar and glass fiber → add glass fiber grid cloth → two layers of mortar, glass fiber and embedded parts → line classification bonding → transportation and construction site installation.

The installation method of non bearing GRC Roman column is the same as pouring concrete from the upper opening after installation. The difference is that load-bearing GRC Roman columns should be installed first and then covered, otherwise concrete cannot be poured, while non load-bearing GRC Roman columns can be decorated with buildings first and then GRC Roman columns.

The GRC industry chain is mainly composed of raw material suppliers, GRC product use consulting and effect designers, GRC product design and production vendors, GRC product installation and construction manufacturers, and end users with personalized GRC product needs as the end users. GRC industrial value chain is the structural form of value organization and creation behind the industrial chain. It represents the value attribute of the industrial chain and reflects the transfer and creation of value.

The premixing process is to mix the chopped glass fiber with the cement mortar matrix to form a uniform glass fiber cement mixture, and then pour or spray it. According to the different molding methods, the premixing process can be divided into premixed casting process and premixed spraying process. The pre mixed pouring process is similar to the precast concrete products, and the vibration process is often supplemented in the pouring process.

Hainan Sculpture 、 Hainan GRC component 、 Hainan EPS